3
1. Unpacking
2. Specifictaions
Your
package should contain the following items:
one
modul
one holding plate with SUBD9 connector
one adaptor SUBD9 to RJ45
this documentation
one sticker for SUBD connector labelling
Please check your
package after unpacking for missing
parts ! Missing parts should immediately be reported to your dealer.
Please fill out the registration card completely and return it to us.
Support and software updates will be available for registered
customers only.
Moreover, you help us making our products better.
ethernet controller for
expansion port
10MBit data transfer rate
twisted pair connector (10BASE2)
8k x 16 integrated buffer memory
NE2000 compatible
four status LEDs (TX, RX, COL, LNK)
low power technology
INT2 / INT6 selection by software possible (NetBSD / Linux)
officially assigned unique MAC address (EEPROM)
NORWAY
NORWAY
NORWAY
1
1
1
1
1
NORWAY
!
!
!
!
!
!
!
!
!
HIGHWAY
NORWAY
10
NORWAY
A.1.3 JTAG interface
A.2.1Autoconfig data
A.2.2Memory map
A.2.3 Register definition
The JTAG interface on the
is intended for bus interface
logic upgrades..
Upgrades are only available by authorized support.
This connector is not intended for use by customers.
Do not connect any cable to this port !
Your
can be rendered unusable by doing so.
You have been warned.
The
module is addressed as addon module of the
and does not appear in the autoconfig list.
Information on
memorymapisavailablefromE3B.
Please contact us if you are interested..
Information on register mapping of the
module are
available for interested programmers on request. We will support any
efforts like driver development for NetBSD or Linux.
NORWAY
NORWAY
NORWAY
NORWAY
NORWAY
WARNING:
A.2. Programming information
HIGHWAY
