ELiiXA® UC8/UC4
27
Eliixa_Color–revF 04/11
e2v semiconductors SAS 2011
Title
Command
Features
w srce 0
Set signal source to CCD sensor
w srce 1
Set signal source to user pattern
Signal Source
r srce
Get current signal source
w mode 0
set 3+1 outputs Dual Base 8/ 8bits (*)
w mode 1
3+1 outputs Dual Base 8/10bits (*)
w mode 2
3+1 outputs Dual Base 8/12bits (*)
w mode 3
4 outputs Medium 8bits
w mode 4
4 outputs Medium 10bits
w mode 5
4 outputs Medium 12bits
w mode 7
3+3 outputs dual base 8 bits RGB + RGNir/RGMono (*)
w mode 8
3+3 outputs dual base 8 bits RGB + RBNir/RBMono (*)
w mode 9
3+3 outputs dual base 8 bits RGB + BGNir/BGMono (*)
w mode 13
Dual base interlaced 8bits RGB/RGB (**)
Output Mode
r mode
Get current output mode
w rway 0
w rway 1
set the scanning direction:
0: Reverse
1: Forward
Scanning direction
r rway
get the scanning direction
w loop <val>
Set number of lines for spatial correction
val :0 to 8 :
0 : Correction inhibited
1 : Delay 0,5 lines
2 : Delay 1 line
3 : Delay 1,5 lines
4 : Delay 2 lines
5 : Delay 3 lines
6 : Delay 4 lines
7 : Delay 5 lines
8 : Delay 6 lines
Spatial correction
r loop
get the number of lines for spatial correction
(*) for RGB models these modes are equivalent to RGB 8 bits 3x80 or 3x60MHz
(**) for RGB models (BA0) only
