ELiiXA® UC8/UC4
14
Eliixa_Color–revF 04/11
e2v semiconductors SAS 2011
4
STANDARD CONFORMITY
The ELIIXA cameras have been tested using the following equipment:
• A shielded power supply cable
• A Camera Link data transfer cable ref. 14B26-SZLB-500-OLC (3M)
e2v recommends using the same configuration to ensure the compliance with the following standards.
4.1
CE Conformity
The ELIIXA cameras comply with the requirements of the EMC (European) directive 89/336/CEE (EN
50081-2, EN 61000-6-2).
4.2
FCC Conformity
The ELIIXA cameras further comply with Part 15 of the FCC rules, which states that:
Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for Class A digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
4.3
RoHs Conformity
ELIIXA cameras comply with the requirements of the RoHS directive
Warning
: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
