E2S D1xC1X05RDC024-D, Instruction Manual

Page: 12 / 16

warning signals
2S
ALERTALARM RANGE
EUROPEAN SAFETY SYSTEMS LTD
IMPRESS HOUSE
MANSELL ROAD
ACTON
LONDON W3 7QH
WWW.E2S.COM
C
THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE
MATTER THEREIN IS COMMUNICATED IN CONFIDENCE AND
IS THE COPYRIGHT PROPERTY OF EUROPEAN SAFETY
SYSTEMS LTD. NEITHER THE WHOLE OR ANY EXTRACT MAY
BE DISCLOSED, LOANED, COPIED OR USED FOR
MANUFACTURING OR TENDERING PURPOSES WITHOUT THEIR
WRITTEN CONSENT.
EUROPEAN SAFETY SYSTEMS LTD.
AS PER LATEST DATE OF ISSUE SHOWN ABOVE
DRAWING TO BS8888:2000 GEOMETRIC TOLERANCES TO ISO1101:1983 LINEAR DIMENSIONAL TOLS
ANGULAR DIMENSIONAL TOLS STANDARDS
MOD No.
REASON - INITIAL - DATE
ISSUE
DATE
APPROVED CHECKED
DATE DATE
DRAWN
WEIGHT (Kg)
SURFACE FINISH
MATERIAL
ALTERNATIVE MATERIAL
SHEET
SCALE
TITLE
A3
IF IN DOUBT, ASK - DO NOT SCALE ALL DIMENSIONS IN MM
DRAWING NUMBER
A
B C D E F G
10
9
G F
E
7
8
6
5
D C
1
3
4
2
A
B
R.S.RAIT
B.ISARD R.N.POTTS
NTS
Stage 1 +ve
Stage 1 -ve
Stage 2 -ve Stage 2 +ve
OF
SWITCHES FOR STAGE OPERATION CUSTOMER SUPPLIED
D190-06-301
6
5
+ - - + S2 S3
R1
+
- -
+ S2
R2
R1
OPTIONAL LINE MONITORING RESISTOR, CUSTOMER SUPPLIED, 14V MAX SYSTEM = 120Ω MIN, 2W MIN OR 1KΩ MIN, 0.5W MIN 28V MAX SYSTEM = 470Ω MIN, 2W MIN OR 2.4KΩ MIN, 0.5W MIN
RECOMMENDED MINIMUM VALUES:
R1
Three/Four Stages. Voltage Free 2nd, 3rd & 4th Stage Activation Configuration Config.: 6
Common Positive Customer Set H1 & H2 to Negative Switching (See Below) Stage 1: Apply Power to ve & Stage 1 -ve Stage 2: Apply Power to ve & Stage 1 -ve & connect Stage 2 -ve to Stage 1 -ve Stage 3: Apply Power to ve & Stage 1 -ve & connect Stage 3 -ve to Stage 1 -ve Stage 4: Apply Power to ve & Stage 1 -ve
& connect Stage 2 -ve & Stage 3 -ve to Stage 1 -ve
Two Stage Configuration
Config.: 7
Independent Stage Input Reverse Polarity Stage Monitoring Stage 1: Apply Power to Stage 1 +ve & Stage 1 -ve Stage 2: Apply Power to Stage 1 +ve & Stage 1 -ve & connect Stage 2 -ve to Stage 1 -ve
Independent Sounder & Beacon Activation (Remove Link Wire)
H2 H1
Set H1 & H2 to -ve switching
H2 H1
Set H1 & H2 to -ve switching
Cut Link W1
-ve IN
+ve IN
-ve OUT
+ve OUT
-ve IN
+ve IN
-ve OUT
+ve OUT
R3
R2
ve IN
ve OUT
Stage 1 -ve IN
Stage 1 -ve OUT
Stage 2 -ve Stage 3 -ve
19/01/2022 19/01/2022 19/01/2022
INTRODUCTION
1
RSR - 19/01/2021
D1xC1X / D1xC2X / STExC1X DC SOUNDER /
XENON WIRING DIAGRAMS