E2S D1 B2LD2 Series Instruction Manual Download Page 11

 

 

 

 

E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: [email protected] 

www.e2s.com 

DC‐096_Issue_A ‐ Page 1 of 1 ‐ QAF_252_Issue_5

 

 

 

 

Martin Streetz 

Document No.: 

DC‐096_Issue_A 

Quality Assurance Manager 

Date and Place of Issue:  London, 24/02/2022 

UKCA Declaration of Conformity 

Manufacturer:   

 

European Safety Systems Ltd. 

 

 

 

Impress House, Mansell Road, Acton 

 

 

 

London, W3 7QH 

 

 

 

United Kingdom 

 

Equipment Type:  

 

D1xB2X05, D1xB2X10, D1xB2X15, D1xB2X21, D1xB2LD2, D1xJ2 

 

Directive  UKSI 2016:1107 (as amended by UKSI 2019:696) – Schedule 3A, Part 1 : Product or Protective System Intended for use in Potentially Explosive Atmospheres  

(UKCA) 

 

Notified Body for UK type Examination (Module B): 

UL International (UK) Ltd 

Notified Body No.: 0843 

Unit 1‐3 Horizon Kingsland Business Park, Wade Road, 

Basingstoke, Hampshire RG24 8AH UK 

UK‐type Examination Certificate (Module B): 

UL21UKEX2130X

Notified Body for Quality Assurance Notification / Conformity to EU‐type 

based on 

quality assurance of the production process (Module D): 

Sira Certification Service 

Notified Body No.: 0518 

Rake Lane, Eccleston, Chester CH4 9JN, UK 

Quality Assurance Notification (Module D): 

CSAE 22UKQAN0046 

Provisions fulfilled by the equipment: 

II 2G Ex d IIC T6…T3 Gb 

II 2D Ex tb IIIC T95°C…T169°C Db  

Standards applied: 

EN 60079‐0:2018 

EN 60079‐1:2014 

EN 60079‐31:2014 

IP6X Dust Protection to EN60079‐0 / EN60079‐31 

Directive 2014/30/EU: Electromagnetic Compatibility Directive (EMC)  

Standards applied: 

EN 61000‐6‐1:2007 

EN 61000‐6‐2:2005 

EN 61000‐6‐3:2007 / A1:2011 / AC: 2012 

EN 61000‐6‐4:2007 / A1: 2011 

Directive 2011/65/EU: Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) 
The product and all the components contained within it are in accordance with the restriction of the use of hazardous substances in electrical and electronic 

equipment, including amendment by Directive 2015/863/EU.

 

Regulation (EC) 1907/2006: Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) 

The product and all the components contained within it are free from substances of very high concern. 

Other Standards and Regulations 

EN 60529:1991 + A1:2000 + A2:2013. ‐ Degrees of protection provided by enclosures (IP code) – enclosure rated IP66/67 

 

On behalf of European Safety Systems Ltd., I declare that, on the date the equipment accompanied by this declaration is placed on the market, the equipment 

conforms with all technical and regulatory requirements of the above listed directives, regulations and standards. 

 

This Declaration is issued under the sole responsibility of the manufacturer.

 

Summary of Contents for D1 B2LD2 Series













Reviews: