E
1
DT
E1/PRI Splitter/Buffer
Installation and Operation
6-3
Line Interface
Signal
ITU G.703/G.704, 2,048 kbits/s
Line Code
HDB3
Data Type
Framed or Unframed
Signal Amplitude
Operating:
±3.00V ±10% nominal
Absolute Maximum:
-5V (lower limit)
+5V (upper limit)
Line Connection
Two RJ-45 connectors hard-wired in parallel.
Optional BNC adapter cable available on request.
Line connection supports 120 balanced, 75 unbalanced
or monitor connection.
Note that there are no terminating devices in the line
interface.
Un-powered performance
Applies to the pass-though connection
Crosstalk
Better than -64dB
Residual output
Better than -35dB
Input signal loading
Less than 0.1dB
Summary of Contents for E1DT-ASSY-0058
Page 6: ...E1DT E1 PRI Splitter Buffer Installation and Operation This page intentionally blank ...
Page 8: ...E1DT E1 PRI Splitter Buffer Installation and Operation 1 2 This page intentionally blank ...
Page 12: ...E1DT E1 PRI Splitter Buffer Installation and Operation 3 2 This page intentionally blank ...
Page 28: ...E1DT E1 PRI Splitter Buffer Installation and Operation 7 6 This page intentionally blank ...