SETTING THE DRILL DEPTH USING THE
AUTOMATIC SHUT OFFS
•
After loosening the stop rod nuts,
move the stop closer or farther
away from the stop pad in order to
get it the correct distance. Then
re-tighten the nuts.
•
Repeat for each drill system.
•
After you drill a set of holes,
measure the actual holes drilled to
confirm the proper drill depth. You
may have to make another small
adjustment.
Summary of Contents for 210-3 EQ MT
Page 1: ...SETTING UP THE MODEL 210 3 4 and 5 EQ MT...
Page 15: ...INSTALLING THE DRILL BITS Open the retainer latch on the drill motor Pinch point...
Page 16: ...INSTALLING THE DRILL BITS Place the bit into the chuck and close the latch Pinch point...
Page 27: ...LEVELING THE DRILL SYSTEMS First loosen the two bolts on the Adjusting Arm...
