45
(
The back rest will the come off once all bolts are removed on each side in above photo
)
Remove all 4 bolts using a
13mm
socket with a rachet. Be careful as there are 4 spacers as well that will
be.
Arm Rest Replacement
–
To replace the armrest, start by removing the mechanism covers on the side of
the seat the armrest is being replaced. Then, take out the two 6mm hex head bolts, and install the new
armrest. This is for both sides of the seat.
Floorboard and Horn Replacement
Horn
–
To replace the horn, start by removing the front body shroud and sliding front plate. Once
removed, unplug the electrical connectors that plug in the horn. Then, use a 10MM wrench or flat head
screwdriver to remove the bolt that secures the horn to the frame.
Summary of Contents for EW-46
Page 1: ...EW 46 Service Repair Manual...
Page 23: ...23...
