14
Testing the Charging System
To test the charging system, a multimeter or voltage tester will be required. If the scooter is not
recharging properly, testing the output voltage of the charger, and voltage at the charger port, will help
narrow down the issue may be.
1.
Testing the Charger
To test the output voltage of the charger, plug the
chargers power supply directly into a wall outlet,
but not into the scooter. Set your multimeter to
DC 200 or higher and insert a multimeter lead
into each of the two parallel prongs as shown in
the photo below.
If the charger is working properly, it should be
emitting anywhere from 54 volts to 57 volts.
If the charger is not working properly, please
contact EWheels service department directly for a
replacement.
Summary of Contents for EW-46
Page 1: ...EW 46 Service Repair Manual...
Page 23: ...23...
