27
You’re
going to also want to remove the 2 philip screws in the front just below the charger port as well
as the rear bolts that look to hold the rear bumper.
The next step would be to remove the
connectors that go to both taillight fob.
Once all these steps have been followed, the
main body shroud can now be lifted off. Tilt
the main body shroud’s
back end towards the
front of the scooter, without lifting the front
end. Then, the lip of the main body shroud
will be able to clear the floorboard and be
pulled off. Removal of the floorboard is not
necessary but may be preferred to avoid
accidental damage. (Your now DONE!!)
Summary of Contents for EW-46
Page 1: ...EW 46 Service Repair Manual...
Page 23: ...23...
