The front wheel is a quick release type. The quick release locking lever must be set squarely in line with the front
fork and firmly tightened to ensure safety. Please check before each ride.
•
The handle bar assembly may need some small adjustment for the alignment of the headset to the front
wheel.
Fit and Align handle bars
•
Use a 6 mm Hex key to loosen the handle bar stem.
•
Relocate and lock the head stem hinge.
•
Align handle bars and ensure they are perpendicular to the front wheel.
•
Carefully lower the handlebars back down and tighten the 6mm hex key firmly. Check and recheck
for firmness.
Adjustable Headset
Remove the front
fork spacer from
Front Fork and
then fit the front
wheel.
Remove the nut and spring
from the quick release
shaft and pass shaft
through the wheel hub.
Replace spring and nut. Fit
front wheel to forks, adjust
and tighten the quick
release mechanism. The
over centre locking lever
should be in line with fork
as shown.
