•
It is recommended you have a bicycle workshop assist you with the adjustment of the gears.
Gear adjustments
•
Cable tension must be checked to ensure there is no slack in cable when in highest (fastest gear). Failure
to do this will result in poor gear changes.
•
Tension of cable can be adjusted on the rear of the cable insertion point on the back of the derailleur.
•
Lube chain and sprockets regularly with a Teflon based chain lube.
V
、
Simple Troubleshooting
Driving system
Problem
Check
Action
Low speed
Battery power
Charge Battery
Low tire pressure
Inflate the tire
Flat tire
Repair the tire
Over Load
Do not overload
The motor is not working
All Connections and
correct location of
battery.
Ensure every plug is connected
↓
does not improve, please contact with your dealer.
Power indicator light does
not shine
Battery power indicator on
but the bike does not work.
Loose wiring or
connection.
Check wiring and connections, particularly brake
connections,
→
please contact the dealer.
Will only travel short
distance.
Is the battery fully
charged?
Charge fully or Replace the battery.
Does the battery
need replacing
At an ambient of 20
℃
, when fully charged, is the
discharge time, using 5amp load test, shorter than
50 minutes. If yes advise replacing battery.
Front brake
Chain
Front wheel
