4.3
Re-tightening of screws – extremely important!
•
Do not use the product if slack occurs either in the folding mechanism or in the steering. This must be adjusted
immediately. Contact us in need of help. If not adjusted the slack will worsen and parts will take damage. This could
potentially cause injury to the driver as the product can be damaged. How often the product needs maintenance depends
on the usage of the product.
•
How to avoid slack in the steering column?
It is extremely important to maintain a good and active weight balance on
the standing board. Keep one foot in front and one foot on the back of the board. When accelerating, distribute the weight
more to the front foot. When braking, distribute the weight more to the rear foot. This is to avoid wear on the handlebar.
As a result of the Principle of Leverage, the force loaded at the bottom of the steering column will be enormously when
fully accelerating or braking if you pull and lean on the steering/handlebars. This is avoided with active weight balance.
•
Make sure to regularly check and tighten all screws when needed.
For frequent use, please check once every 1-2
weeks.
This also depends on the type of surface you’re riding on, for example will use on cobblestones lead to more
frequent need for tightening.
4.
4
Br
akes
Instructions for maintenance and testing of the brake
•
T
he brake must be adjusted and tightened when needed.
Contact us for guidance, or check out
our help center at www.e-wheels.no (Norway) or www.ewheels.se (Europe).
•
Always check the brake before using the product. If it does not brake sufficiently, then the issue must
be resolved before using the product.
•
Products with disc brakes must replace brake pads when needed. You can order brake pads at www.e-
wheels.no (Norway) or www.ewheels.se (Europe)
EN
4.
5
Charger
Charging instructions
•
Insert the plug from the charger into the power socket (AC110V-230V).
•
Open the charging port cover on the electric scooter and insert the charging connector into the charging port.
•
The E-wheels charger have a built-in timing function for when the battery is fully charged. The charger light is red to
indicate that charging is in progress. When the lamp changes from red to green, it indicates that the battery is fully
charged.
•
Make sure to place the scooter in a dry and well ventilated rom/area when charging the battery.
