16
Quick Guide - Telecamere AHD Full HD - 090010937
BULLET CAMERAS CORRECT (right) AND WRONG (left) POSITIONS:
4.3 Cameras standard switching
To switch cameras standard, use the remote control (below) and wire it to the coax cable of the relevant camera.
(The remote control is not supplied with the device; it has to be ordered.)
To switch the standard, press the
key to power on the remote control and follow the instructions given. By default, ca-
meras are in AHD mode.
To enter OSD menu, press the OK key at the centre.
To switch the cameras to the 960H standard,
select the
AHD option.
To switch the cameras to the Full HD (1080P) standard,
select the CVBS option.
For fixed or varifocal lens cameras, press
until the
selection rectangle marks the chosen option.
To save the setting, keep
pressed for 5 seconds.
For motorized cameras:
- Press OK to enter the OSD menu, shown on the screen
connected to the DVR.
- Press to move the arrow cursor next to "Exposition".
- Press
thrice, then OK to access the "Hidden" menu.
- Position the arrow cursor next to "Monitor Out" and
press OK until the chosen option (AHD or CVBS) is shown.
- Position the cursor next to "Return" and press OK to go
back to the main menu
- Position the cursor next to "Exit" and press OK to save
the settings and exit the OSD menu.
For motorized models,
press...
to zoom in
to zoom out
to move the focus far
to move the focus near
