090010937
-
Telecamere AHD Full HD
-
Quick Guide
13
•STEP 2
Loosen the screws indicated by the arrows with the hex key provided to adjust the 3-axis setting of camera and joint.
•STEP 3
To adjust camera positions: move and rotate the camera body, joint and bracket as shown by arrows in the images below
(A) and (B). To enable tilt movement, loosen the two screws on both sides of the camera indicated by the arrows at STEP 2.
•STEP 4a (bullet cameras with external screws)
When installing a bullet camera with varifocal lens: to adjust
the lens use a proper screwdriver to adjust zoom and focus,
and use the tool as illustrated in the image below:
NOTE
Pay attention when screwing and uncrewing the adjusting
screws: do not screw beyond the closing point to avoid
damage to the camera.
•STEP 4b (motorized bullet cameras)
When installing a bullet camera with motorized lens, adjust
the lens with the special remote (See chapter 4.3 on page 16).
NOTE
DO NOT open the panel at the back of the camera.
A
B
NO