14
Quick Guide - Telecamere AHD Full HD - 090010937
•STEP 4c (bullet cameras with internal screws)
To access camera controls, open camera door (A) and adjust lens, focus and zoom.
Use a suitable screwdriver to adjust
focus and zoom screws
. Use the trimmer indicated by the arrow to adjust camera IR level (C).
:
!!! PAY THE UTMOST ATTENTION WHEN ADJUSTING CAMERA LENS, ZOOM and FOCUS !!!
IMPORTANT NOTE
INSERT SILICA GEL PACKETS INSIDE CAMERAS THAT NEED TO BE OPEN FOR CALIBRATION
The Silica Gel packet used for device transport must not be POSITIONED INSIDE THE CAMERA BODY. A NEW Silica
Gel packet shall be used instead and inserted inside the camera; the packet has to be stored properly to avoid
humidity problems. If Silica Gel packets are not used, the visible consequences are the internal glass fogginess and
the video live images or recording damage. In the long term, damages to the electronic parts of the camera may
occur.
USAGE INSTRUCTIONS
After camera opening and calibration, insert the new Silica Gel packet properly stored (see note below) inside the camera
body and reassemble the camera
immediately
. It is recommended (1) to position more than one Silica Gel packets in
case of installation in days with high humidity rate or (2) to replace the Silica Gel packet as soon as fogginess appears.
The Silica Gel packet inside the camera must be eliminated and replaced with a new packet each time the camera
is opened.
SILICA GEL PACKETS STORAGE
The packets must be taken from an intact and sealed box and positioned inside the device to be protected against
humidity. The desiccant packets must not be left in the open air longer than a few minutes before usage. Periods longer
than a few minutes in the open air may damage the packet irreparably.
Packaging with Silica Gel packets inside must be closed immediately after the necessary elements have been taken out.
The packaging shall be closed with polythene heat-sealing or, alternatively, tied with proper wires. Open packaging shall be
used in the shortest time possible; the product is stable in the long term only if stored in a dry, humidity-protected place.
Materials stored for periods longer than 12 months may result less effective and feature less desiccant capacity; for these
reasons it is recommended to store the material inside intact and sealed boxes and use the material within 12 month time.
A
B
C