Electric start button
This is a starting motor button (switch) for engine starting.
With the main switch
“
on
”
, press this button while holding the front or rear brake lever will
start the engine.
CAUTION:
Release this button immediately after engine has been starter, and never press the button
again to avoid damaging the engine.
This mechanism is a safety design. The engine can only be started after the front or rear brake
lever has been applied.
Do not use light system. Turn signal light to the “off” position when the engine is being started.
High/low beam switch
This is the high and low beam of headlight switch. Press this switch to switch between high and
low beams.
This is for high beam.
This is for low beam. (Please turn to low beam when riding in the city.)
Horn Switch
Press this button down when ignition switch is in the
“
ON
”
position, the horn will sound.
Turn Signal Switch
Turn signal lights are used when turning left/right or changing lane.
Turn ignition switch to the
“
ON
”
position, and slide the turn signal switch to left or right. Then, the
turn signal lights will flash.
To release, simply return the turn signal light button to the original position.
Left signal light is flashing means you intend to make a left turn.
Right signal light is flashing means you intend to make a right turn.
Engine stop switch
When the engine stop switch is turned to this position, press the electrical starter button, the
engine can be started.
When the engine stop switch is turned to this position, press the electrical starter button , the
engine can not be started.
8
Copyright ©2008-2009 ETON America, all rights reserved.