background image

2

ONE-YEAR MANUFACTURER’S WARRANTY

· 

All goods manufactured by G & C Electronics cc t/a E.T. Systems carry a 12 

month factory warranty from date of invoice. 

· 

All goods are warranted to be free from faulty components and           

manufacture.

· 

Faulty goods will be repaired or replaced at the sole discretion of E.T. Sys-

tems, free of charge.

· 

This warranty is subject to the goods being returned to the premises of E.T. 

Systems via your service provider.

· 

In the event of the goods being supplied by dealer, merchant, agent or 

duly appointed installer of E.T. SYSTEMS, the claim must be directed to that 

supplier.

· 

The carriage of goods is for the customer’s account.

· 

This warranty is only valid if the correct installation and application of 

goods, as laid out in the applicable documentation accompanying said 

goods, is adhered to, and does not cover any damage caused by han-

dling, installation or Acts of God.

· 

All warranty claims must be accompanied by the original invoice.

· 

The liability of E.T. SYSTEMS and/ or their distributors is limited as herein set 

out. E.T. SYSTEMS and/ or their distributors will not be liable for consequen-

tial or incidental damages howsoever arising.

RETURN OF GOODS

· 

All goods to be returned as supplied.

WARRANTY

Summary of Contents for ET-500-PLUS









Reviews: