36
4G LTE (Option)
GPS
GNSS: uBlox NEO-M8N, Support GPS/QZSS L1 C/A,
GLONASS L1 FDMA, SBAS: WAAS, EGNOS, MSAS
Navigation update rate up to 10 Hz
Cold start no more than the 60s
Sensors
Gyroscope, Light sensor, compass.
Battery
Two hot-swappable batteries 7.6V 4050mAH x2 30.78*2=61.56Wh
I/O
1x USB 3.0 @0.5A Type A
1x USB 3.0 @0.5A Type C
1x Micro HDMI output
1x Audio jack (3.5mm, 4 poles, support MIC input)
1x DC jack: 2.5mm OD jack
1x 35 Pin Docking connector (19V DC and 2x USB 3.0)
1x Micro SD slot
1x NANO SIM slot
Expansion IO
1x USB2.0 x 2
module(option)
1x RS232
1x RJ45 port: 10/100M
Mechanical
Option: Anti-Microbial medical chassis
Dimension: 270*191*20mm
Weight: 1.3KG
AC adaptor
19V 3.3A input.
100 -240V AC in, standard US plug
Environmental
Operation temperature(AC mode): -20~+50°C
Operation temperature(Battery mode): -10~+55°C
Storage Temperature: -40 ~70 °C
Humidity: 10% to 90%
ROHS: Compliant
Regulatory
FCC/ CE/RCM/IC/ROhs/WEEE/REACH
Appendix B Compliance Information
B1 FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Modifications not
expressly approved by Device Manufacturer could void the user’s authority to
operate the equipment under FCC rules.
Part 15B Equipment
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
