16
6. Using the UT55
Power on for The First Time.
1. When starting for the first time, fully charge the device.
Plug the power adapter into the device and charge the device to make sure that both batteries are full.
2. Boot.
Press the power button to power on until the power LED is on.
Do not press the power button repeatedly, and do not press and hold the power key for more than 4
seconds.
3. Enter / exit sleep mode.
When the device opens the Windows system, press the power key shortly to see the screen turned off.
The power LED will flash, indicating that the system is in the sleep mode.
When the device enters sleep mode, press the power-on key to see the screen lit. When the power led is
solid, the system has exited sleep mode and entered normal operating mode.
4. Shutdown.
Select the menu below to shut down.
【
Start
】
→
【
Power
】
→
【
Shutdown
】
When the device shuts down, the device turns off the screen and waits for about 10 seconds for the
power light to go out. At this point, the system is turned off.
Use the Front and Rear Cameras.
Step 1: Camera Select
【
start
】
→
【
camera
】
. Click on the camera icon to enter the camera application:
