E-Seek M310, Reference Manual

Page: 20 / 32

1 Using M310
Setting the Password
Use the password properties to request a password before editing a profile and to disable unauthorized
access to device. By default, M310 doesn’t require password to access it.
To configure a password for your M310, go to:
Start > Setting > Control Panel > Password
Double tap password, then type your password and confirm password boxes, and tap OK.
Figure - Set the Password
If you want to Enable password protection on power ON or resume from suspend, check box to select it,
and then tap OK.
To disable password you must clear the password box and tap OK.