E-Seek M310, Reference Manual

Page: 13 / 32

11
Getting Started
Recalibrate the Stylus (Optional)
This is an optional procedure for recalibrating your touch screen. If you feel there is a shift be-
tween the touch point and the curser, then follow the recalibration process by going to:
Start > Settings > Control panel > Stylus
From Stylus Properties select Calibration tab located at right on your screen next start the
process by pressing the Recalibration button. (
Figure 4-8).
Follow the instructions on screen. (
Figure 4-9).
Figure - Start to Calibrate
Figure - Calibration