E-Seek 200, Programming Manual, Page: 8 / 16

- 8 -
Registration Key Read & Write
Description: To setup Registration Key, changes will be effective after scanner ACK
response. Control characters are not permitted. The maximum length is 30 characters*.
When the REGIEN option is enabled, the data will be added between serial number and
decoded data.
Example:
„SOH‟<REGKEY:>„EOT‟
Scanner Response:
ACK “XXXXXXXXXX…\r\n” / NAK
X is a printable ASCII, with variable length
Scanner Response: ACK / NAK
Description Field Values allowed
Reg. Key Read REGKEY:
Add to stream Enable REGIEN=1
Disable * REGIEN=0
Reg. Key Write REGKEY=
Table 2.2
* Do not use write function on every scanner reads, the maximum write is 10,000 times.
Speaker Setup
Description: To setup speaker volume, power-up beeps and parameter beeps (beeps
after changing the scanner setup via serial port). Changes will be effective after scanner
ACK response.
Scanner Response: ACK / NAK
Description Field Values allowed
Speaker Volume Off SPVOLU=OFF
Low SPVOLU=LOW
Medium * SPVOLU=MEDIUM
High SPVOLU=HIGH
Power-Up Beeps Enable * SPPOWB=1
Disable SPPOWB=0
Parameter Beeps Enable * SPPARA=1
Disable SPPARA=0
Table 2.3