E-ride Industries 2011 EXV2 Owner'S Manual Download Page 80

Page: 80 / 109

e-ride Industries

Page 78

Damage caused by failure to provide proper service, maintenance and/or storage,
as described in the e-ride owner’s manual.

Warranty coverage will not in any event cover:

Damage resulting from improper repairs, modifications or use of non approved
parts or repairs.

Damage resulting from continued use of vehicle after defect is or should have
been discovered.

Damage resulting from accident, fire, theft, vandalism or any acts of war or God.

Any damages to the batteries from the lack of charging, freezing or overheating
conditions, infrequent use, charging with a charger not supplied by e-ride
Industries.

Damage or loss caused by tire puncture or failure to maintain correct tire pressure.

Summary of Contents for 2011 EXV2














































































































Search results

Summary of Contents for 2011 EXV2

Reviews:

Related manuals for 2011 EXV2

Brands by name

Popular brands

E-ride Industries 2011 EXV2, Owner'S Manual

Search results

Summary of Contents for 2011 EXV2

Reviews:

Related manuals for 2011 EXV2

Brands by name

Popular brands