E-ride Industries 2011 EXV2 Owner'S Manual Download Page 82 | Manualshive

Page: 82 / 109

background image

e-ride Industries

Page 80

vehicle speed, braking system or regen, steering, transaxle, motor, controller, charging
system, electrical system parts or any other operating system of the vehicle that can cause
it to perform different than e-rides specifications. The vehicle is not maintained as
outlined in the vehicles owners’ manual or misuse of the vehicle including overloading,
racing, used as a tow vehicle, driving over curbs or driving through water deep enough to
cause electrical system damage or towing the vehicle in any manner. e-ride Industries is
not responsible for any injury to person or property if any such above modifications and
alterations are made.

Transfer of limited warranty

Warranty is transferable in the event that the vehicle is sold to a new owner. In the

event that this would happen the new owner must register for a continuation of the
original warranty on e-ride Industries web site under warranty registration at

www.e-

ride.com

or by contacting e-ride at 1-800-950-4351. In the event that this form is not

«
...
80
81
82
83
84
...
»

Summary of Contents for 2011 EXV2














































































































Reviews:

No comments

Related manuals for 2011 EXV2

Brand: KAYO MOTO Pages: 9

Brand: Hamron Pages: 12

Brand: YTL Pages: 14

Brand: Ventrac Pages: 45

Brand: GMX Pages: 21

Brand: GMX Pages: 25

Brand: Leggero Pages: 98

Minor VM Hydrostatic

Brand: Scarab Pages: 32

Brand: Yamaha Pages: 282

Brand: KAYO MOTO Pages: 8

Brand: KAYO MOTOR Pages: 99

Brand: Unimog Pages: 292

Brand: Kellfri Pages: 8

Brand: Yamaha Pages: 589

2012 TERRAIN 1500

Brand: E-Z-GO Pages: 78

Brand: E-Z-GO Pages: 135

Brand: PRONAR Pages: 133

Brand: PRONAR Pages: 136

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands