background image

 Version     1.1 

 7.     Troubleshooting 

 Problem 

 Solution 

 Low     top     speed 

 Charge     the     battery     fully     and     test     again. 

 Power     switched     on     but     the     engine     does     not     work 

 Remove     and     reinstall     the     battery. 

 Low     Range 

 Verify     tire     pressures. 
 Range   can   be   affected   by   weather   (especially 
 cold   weather),  road   conditions,  and   charge  on 
 the   bike   (weight  of   the  rider   for   instance),  Tire 
 pressure. 
 Verify     the     pressure     in     both     tires. 
 Perform     a     full     battery     charge     and     test     again 

 Power     switched     on;     the     bike     does     not     work 

 The  control  unit  or   the  motor   might  need  to  be 
 replaced 

 Power     switched     on;     the     bike     works     only     with     throttle 

 The  controller,  the  motor  or  pedal  sensor  might 
 need     to     be     replaced 

 Throttle     unresponsive 

 View   battery   charge   level   and   recharge   fully  if 
 necessary 
 The  control  unit  or   the  motor   might  need  to  be 
 replaced 

 The     bike     goes     away     by     itself 

 Check  that  the  throttle  is  not  jammed.  Lubricate 
 or     replace     the     throttle     grip 

 The     bike     does     not     start     after     stop 

 Check   that   the   brake   lever   is   released 
 completely 

 The  charger  is   connected,  the  signal  light  does  not 
 turn     on 

 Make   sure   that   the   AC   outlet   is   powered 
 correctly 

 The  charger  connected  to  the  battery  but  the  battery 
 is     not     charging 

 Check   that   the   battery   is   not   fully   charged 
 already 
 Check     that     the     charger     is     properly     connected 

 7.1     Technical     Specifications 

 Model 

 FB-NOVABIKE 

 Product     Code 

 FBNB2201 

 Type 

 Pedelec 

 Weight 

 32kg 

 Permissible     Gross     Weight 

 Maximum     120     kg 

 Dimensions     (W   D   H)     mm 

× ×

 1540x300x880 

 Maximum     Speed 

 42km/h     (Limited) 

 Maximum     Mileage 

 38-47     km 

 Display 

 5     step,     LCD 

 Battery 

 48     V,     Li-ion,     10.4     Ah 

 Chargers 

 100V~240V/42V*2A 

 Charging     time 

 3~4     hours 

 Brakes 

 Disc     Brake 

 Motor 

 48V   750W,   starting  at   about  25km/h   the  motor 

×

 power     supply     is     interrupted 

 Pedal     sensor 

 Speed     sensor 

 8 

Summary of Contents for FB-NOVABIKE FBNB2201












Reviews: