manualshive.com logo in svg

E-Mu Xtreme Lead-1, Manual

Share
Download
E-Mu Xtreme Lead-1 Manual Download Page 144

144 

  E-MU Systems

Edit Menu

Filter Envelope

There are three mode options:

•

Time-based

: Defines the Filter Envelope rates from 0 to 127 (approxi-

mately 1 ms to 160 seconds). The Master clock has no affect on time-
based rates.

•

Tempo-based: 

The Filter Envelope times vary based on the master 

tempo setting and are displayed in values such as 1, 2, 3, etc. Note values 
are displayed instead of a number when the time corresponds to an 
exact note value. Tempo-based envelopes are useful when using arpeg-
giators and sequencers because the envelope rates compress and expand 
according to the Master Tempo setting, keeping the envelopes in sync 
with the music. See the illustration on page 96.

•

Envelope Repeat: 

The Envelope Generators can also be made to repeat. 

When the envelope repeat function is On, the Attack (1&2) and Decay 
(1&2) stages will continue to repeat as long as the key is held. As soon as 
the key is released, the envelope continues through its normal Release 
stages (1 & 2). For more information, see “Envelope Repeat” on page 96.

þ  

To Turn on Envelope Repeat:

1.

Move the cursor until it is underneath the Mode field as shown below.

2.

Turn the data entry control clockwise. The lower line changes to:

3.

Move the cursor underneath the on/off field, then turn the data entry 
control clockwise so that Repeat is On.

L1

  FILT ENV         RATE            LEVEL

Attack 1                 84             100%

L1

  FILT ENV         RATE            LEVEL

Attack 1                  1/4              100%

L1

  FILTER ENVELOPE

Mode:  time-based

L1

  FILTER  ENVELOPE

Repeat:  off

Summary of Contents for Xtreme Lead-1


















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands