14
E-MU Systems
Setup
Basic Setup
Connection
Instructions
Power Switch & AC Receptacle
The AC power switch is located on the rear panel. There is no 110/220 Volt
power selector switch since XK-6 utilizes an auto-switching power supply
which accepts from 100V-250V, 50-60Hz.
MIDI Output
The XK-6 can control other MIDI instruments by connecting a MIDI cable
between the MIDI out of XK-6 and the MIDI Input of the other instrument.
The Right Main output
jack carries a mono mix of the
left and right channels when the
Left Main plug is not plugged in.
The Left Main output jack is a
stereo jack carrying both
channels when the right output
jack is empty.
Outputs
In order to reproduce XK-6’s wide dynamic range and frequency response,
use a high quality amplification and speaker system and a stereo setup is
highly desirable The headphone output is the same as the Main output
signal. The headphone jack is located on the left side of the front panel.
Footswitch & Footpedal
Connect a momentary footswitch and a Control Pedal for additional
control. XK-6 auto-senses either normally-open or normally-closed
switches See page 15 for information about how the footpedal should be
wired.
Basic Setup
Summary of Contents for XK6Xtreme Keys
