manualshive.com logo in svg

E-Mu XK6Xtreme Keys, Owner'S Manual

Share
Download
E-Mu XK6Xtreme Keys Owner'S Manual Download Page 187

XK-6 Owners Manual   

177

Effects

Effects Programmed in the Preset

Effects 
Programmed 
in the Preset

Effects are normally programmed as part of the preset allowing you to have 
a different effect for each. This section describes how to program and 
modify XK-6’s preset effects.

  

To Program the Effects as Part of the Preset:

1.

Press the Preset Edit button. The LED illuminates and the Preset Edit 
screen appears.

2.

Use the data entry control to select the FXA Algorithm screen.

3.

Select an Effect. Do not select the “Master Effect” setting or the global 
effects set up in the Global menu will be used instead of the Preset 
Effect settings. 

4.

Use the data entry control to select the FXA parameter screen.

The FxB -> FxA parameter lets you route the B effect through the A effect. 
See “Effect B Into Effect A” on page 182.

5.

Set the other effect parameters to your preference. Refer to the infor-
mation in the last section for detailed descriptions of these parameters.

6.

Use the data entry control to select the FXB Algorithm screen.

7.

Select an Effect. Do not select the “Master Effect” setting or the global 
effects set up in the Global menu will be used instead of the Preset 
Effect settings. 

8.

Use the data entry control to select the FXB parameter screen.

FXA ALGORITHM

 Lg Concert Pan

FXA    DECAY     HFDAMP    FxB>FxA

                90             127             127

FXB ALGORITHM

Distorted Flange

Summary of Contents for XK6Xtreme Keys















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands