Basic Operations
E-MU Systems
26
To Select a Patch Using Direct Patch Select Buttons (Xboard 61):
1. Make sure Program Change mode is off. The
Program
Change
Mode
button’s
LED should not be lit.
2. Press one of the
Direct
Patch
Select
buttons 1 through 16.
To Store a Patch:
1. Press the
Store
button. The
Enter
and
Direct Patch Select
(Xboard 61) LEDs
begin flashing.
2. Select the desired patch number using the
Data Slider
or the
Octave
Tra
and
-
buttons. On the Xboard 61, you can also use the
Direct
Patch Select
buttons 1 through 16.
On the Xboard 61, the new patch you selected begins flashing.
3. Press
Enter
to store the patch. Press
Home
to cancel the operation.
Changing the MIDI Channel
The MIDI specification allows for up to 16 channels to be used. This control allows
you to set the
Basic MIDI channel
for data transmitted by the Xboard keyboard
and controllers. Note that this setting is stored in and recalled from patches.
To Change the MIDI Channel:
1. Press the
MIDI Channel
button. The MIDI Channel LED illuminates. On the
Xboard 61, the Direct Patch Select button representing the Current MIDI
channel also illuminates.
2.
S
elect the desired MIDI channel using the
Data
Slider
or the
Octave
Tra
and
-
buttons. On the Xboard 61, you can also use the
Direct
Patch Select
buttons 1 through 16.
The
Enter
and
Direct Patch
Select (Xboard 61) buttons will be flashing. On
the Xboard 61, the Direct
Patch
Select button representing the new MIDI
channel begins flashing as well.
3. Press
Enter
to confirm the operation, or press
Home
to cancel the operation.
Panic
1
2
3
X Board.book Page 26 Wednesday, April 12, 2006 10:44 AM