background image

Vintage Keys Operation Manual   

69

Arp/Beats Menu

Send MIDI System Exclusive Data

Velocity

Each note in the pattern plays using either a preset velocity value (from 
1 through 127), or using the actual velocity of the played note (ply). 

Note:

 Velocity values will not have an effect on the sound unless velocity is 

programmed to do something in the preset. 

Duration

This parameter sets the length of time for the current step, defined as a note 
value, based on the Master Tempo. The selectable note durations are 
described below.

Repeat

Each step can be played from 1 to 32 times. A repeat setting of “1” indicates 
the step will be played one time (not repeated one time or played twice).

 

To Edit a User Pattern:

1.

The first field in the Edit User Pattern field defines the pattern’s step 
number. Start with the pattern Step 01. 

2.

Define the Key Offset, Velocity, Duration and Repeat values.

3.

Repeat steps 1 and 2 until you have setup the desired number of steps 
in the pattern.

4.

Set the Key Offset to “End” on the last step in the pattern. 

1/32

32nd Note

1/16t

16th Note Triplet

1/32d

Dotted 32nd Note

1/16

16th Note

1/8t

8th Note Triplet

1/16d

Dotted 16th Note 

1/8

8th Note

1/4t

Quarter Note Triplet

1/8d

Dotted Eighth Note

1/4

Quarter Note

1/2t

Half Note Triplet

1/4d

Dotted Quarter Note

1/2

Half Note

1/1d

Dotted Whole Note

1/1t

Whole Note Triplet

1/2d

Dotted Half Note

1/1

Whole Note

2/1t

Double Whole Note 
Triplet

2/1

Double Whole Note

Summary of Contents for Vintage Keys







































































































































































































































































Reviews: