![background image](http://html.mh-extra.com/html/e-mu/vintage-keys/vintage-keys_operation-manual_518549049.webp)
Vintage Keys Operation Manual
39
Basic Operations
Main Screen
Channel Pan
Channel Pan sets the stereo position of the selected MIDI channel. This
control operates like the balance control on your home stereo system.
Channel Pan is the same parameter as MIDI pan controller #10, and
changes made over MIDI are shown in the display.
Note:
Pan settings in the preset ADD algebraically with the Channel Pan
setting. Therefore, if the pan setting in the preset were set to “63
R
,” moving
the Channel Pan setting full left would return the sound to the center
position.
To Change the Channel Pan:
1.
Press the
Main
button to display the Preset Select screen.
2.
Press either
cursor key
until the cursor is underneath the pan field.
3.
Rotate the data entry control to
select a pan value
. 64
L
indicates a hard
left pan, 63
R
indicates a hard right pan. With a setting of “00,” the
sound is centered in the stereo field.
Channel Arpeggiator
This function controls the arpeggiator for each MIDI channel. When the
channel arpeggiator mode is set to Off, then there is no arpeggiation on
that channel, regardless of what is set up in the Master Arpeggiator or
preset. If the channel arpeggiator is On, the preset’s arpeggiator is used,
regardless of whether or not it is turned on in the Preset Edit menu. This
lets you turn on arpeggiation from the main screen.
If the mode is set to “P” (for preset), the preset’s arpeggiator settings and
on/off status is used. If the mode is set to “M” (for master), the master
arpeggiator settings and on/off status (located in the Arp menu) are used.
See the “Arp/Beats Menu” on page 43 for more information.
To Play the Arpeggiator (Quick Start):
1.
From the
Main
screen, press either cursor key repeatedly until the
cursor is underneath the
arpeggiator field
(A:).
2.
Rotate the data entry control to select “
P
” for preset.
3.
Press either cursor key repeatedly until the cursor is underneath the
Preset Category
field and select “
arp
:” using the data entry control.
4.
Press the right cursor button to move it to the
Preset Name
field.
5.
Play notes or chords
on the keyboard. Change presets as desired to
audition the various patterns and presets.
023
2
pad: Horizons
C01 V127 P01
R
A:off User
Pan Position