E-Mu SP-12 Owner'S Manual Download Page 63 | Manualshive

Page: 63 / 99

background image

SAVING YOUR DATA

© E-mu Systems, Inc. 1985

Page 63

Enhanced by The Emulator Archive 2002 www.emulatorarchive.com

5A BACKGROUND: SAVING DATA

Since you spend a lot of time working on segments, songs, and sampled sounds, you
should spend the small amount of time necessary to save them. Don’t just save when
you’ve filled up the memory; save periodically in case something goes wrong (yes,
integrated circuits are subject to Murphy’s Law).

There are two ways to save: via cassette or via disk. To save on disk you will require
a Commodore 1541 floppy disk drive, as used with the Commodore 64 computer.
Saving on disk is far faster and generally more reliable than saving to cassette.

The procedures for saving to disk and to cassette are very similar. To specify a disk
function, enter 2 then the desired function (i.e. save, catalog, load, etc.). To specify a
cassette function, enter 1 then the desired function. Most of the time, when you’re
supposed to initiate a particular operation the display will advise you to “Insert Disk
and Press Enter” or “Start Cassette and Press Enter.” As soon as you press ENTER,
the load, save, verify, etc. function will begin. Note: With cassettes, make sure the
cassette is past the non-recording leader tape at the beginning of the cassette.

We will assume that you are a forward-thinking kind of person, and have trotted down
to your local toy store or discount house for a 1541 disk drive. Cassette interface tips
are described in Appendix F.

Important:

Sounds and sequences cannot be saved on the same disk or cassette.

Clearly label each disk or cassette as to whether it contains sounds or sequences.

5B GENERAL CARE & HANDLING OF DISKS & CASSETTES

Disks and cassettes represent the sum total of your experience with the SP-12, and
should be handled with care.

Disks and cassettes should never be:

Bent or sat on

Exposed to strong magnetic fields (TVs, speakers, etc.)

Subjected to temperature extremes

Left out in the sun

Touched on any of their magnetic surfaces

Disks and cassettes should always be:

Stored in their protective cases (always store disks vertically)

Kept away from dust, dirt, and smoke

Treated carefully and gently.

«
...
61
62
63
64
65
...
»

Summary of Contents for SP-12




































































































Reviews:

No comments

Related manuals for SP-12

Brand: Aeroband Pages: 5

Brand: KAT Percussion Pages: 2

Brand: Ahead Pages: 2

Brand: Ivation Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands