20
Proteus operation manual
MIDI CONTROLLER ASSIGN
The Proteus allows you to assign up to four realtime control sources from
your MIDI controller. These control sources could be modulation wheels,
data sliders or whatever. In this screen, you set up which controllers will
be received by the Proteus. What effect the controller will have is
programmed separately for each preset. The Proteus MIDI controllers are
each assigned a letter, A-D. Each controller letter can be assigned to a
MIDI realtime controller from 01-31. Note: If controller numbers 7 or 10
are selected, they will override the standard MIDI volume and pan
control routings. For more information, see MIDI Realtime Controls in
the Programming Basics section.
CONTROLLER #
A:01 B:02
Next Screen:
CONTROLLER #
C:03 D:04
MIDI FOOTSWITCH ASSIGN
Like the MIDI Controllers, 3 MIDI footswitches can be assigned to MIDI
footswitch numbers. Footswitches can be assigned numbers from 64-79.
Destinations for the footswitch controllers are programmed in the Edit
menu.
FOOTSWITCH #
1:64 2:65 3:66
MASTER MENU
MIDI Controller Assign
Some of the standard
MIDI switch numbers
are listed below.
64 - Sustain Switch
(on/off)
65 - Portamento Switch
(on/off)
66 - Sostenuto (chord
hold, on/off)
67 - Soft Pedal (on/off)
69 - Hold Pedal 2 (on/off)
Some of the standard
MIDI Controller num-
bers are listed below.
1 - Modulation Wheel or
Lever
2 - Breath Controller
3 - Pressure: Rev 1 DX7
4 - Foot Pedal
5 - Portamento Time
6 - Data Entry
7 - Volume
8 - Balance
9 - Undefined
10 - Pan
Summary of Contents for Proteus
