Getting Around on the E4K
4
SOUNDSPRINTING
LOADING & PLAYING SOUNDSPRINTS
Normally when using a sampler, you must load a bank of presets into
memory before playing. The E4K can also be used this way, but for browsing
presets there is a much better way.
SoundSprint
is a new routine which
allows you to load presets quickly into memory one at a time as you browse
through them.
þ
To Access Presets Via SoundSprint:
1. Turn on the E4K and wait for it to come up. The E4K power switch is
located on the rear panel adjacent to the power cord. The display will
appear as shown below.
2. Press the
Arrow
function key (F6) in the lower right corner of the display.
-
Tip:
You could also press
Assignable key 3 to instantly
jump to the sprint page. Don't
hold the key too long or it will
reassign itself!
Press
3. A row of soft-keys will appear along the bottom of the display. Press
Sprint
(F3) to access SoundSprint mode. After pressing Sprint, the follow-
ing screen will appear.
4. You are now in SoundSprint mode. Notice that the
Disk
LED is lit,
indicating that you are in the Disk module. You could have arrived at this
same screen via the disk module and preset browser. The Sprint key is
simply a direct jump to the Sprint page.
