12 - E-MU Digital Audio System
Rear Panel Connections
The rear of the AudioDock provides: 6 balanced analog inputs and 8 balanced analog outputs, a stereo turntable preamp
with grounding lug. 1 additional set of MIDI I/O ports, and a set of alternate 3.5mm output jacks which parallel the 8 line
outputs.
Line Level
Analog Inputs
Six balanced 24-bit, line-level, analog inputs are provided (1-3). These can be used to input any line level signal
such as a keyboard, CD-player, cassette deck, etc. (The analog inputs are assigned to mixer strips in the PatchMix
DSP mixer application.) Input line level can be set to accommodate the consumer -10dBV standard, or the pro
audio
+4 dBu standard in the I/O screen of the Session Settings dialog box.
Either TRS balanced or TS unbalanced cables can be used. Balanced cables provide better noise immunity and
+6dB higher signal level, but standard mono instrument cables also work well.
In
Out
3L
3R
Phono
MIDI 2
Card
Gnd
In
Out
2L
2R
1L
1R
4L
4R
L / R
Ctr / Sub
Sr L / R
SrBk L / R
3L
3R
2L
2R
1L
1R
1 - 4
Monitor
3L
3R
6 Balanced Line Level Inputs
(configured as 3 stereo pairs)
Turntable Inputs
(tied to line input 3)
Turntable
Ground
Alternate Outputs
6 Balanced Line Level Outputs
(configured as 3 stereo pairs)
Monitor
Outputs
MIDI Port 2
In/Out
Connect to
E-MU 1010 Card
(same as outputs 1-4)
