Manual SCA-SE-30-06
V 0.9
10/02 page 3
e-motion Gesellschaft für Antriebstechnik mbH, Zettachring 2, D-70567 Stuttgart, Germany
Tel.: +49-(0)711-7221535, Fax.: +49-(0)711-7221548 E-mail: [email protected]
3. Internal Components of this drive
This drive consists mainly of three parts.
•
A common housing
•
A power stage section which is located on the lower side of the drive
•
An encoder to tacho converter section which is located on the upper side of the drive
Both sections have their own PCB and are not connected internally
3.1. Power stage section
Terminal numbers
(1)
to
(14)
The power stage section of this drive is mainly the same than the one which is used in the SCA-SS-30-06.
Therefore also the standard operation modes IxR compensation, Tacho feedback, voltage control and
torque control are still integrated, but not used when operating in encoder feedback mode.
3.2. Encoder to tacho converting section
Terminal numbers
(15)
to
(28)
This unit is mainly the same than used in the encoder to tacho converter unit ASA-PC-24-01
