manualshive.com logo in svg

E-Mon D-Mon, Installation Manual, Page: 13 / 26

Share
Download
E-Mon D-Mon Installation Manual Download Page 13

STEP 6: Once the MAINS wiring is complete, close the enclosure front panel and
  

secure the panel to the enclosure using the locking mechanism.  

 

Activate the external circuit breaker or equivalent switch to apply AC 

 

MAINS power to the unit.  The Green Class Net Meter’s display should 

 

turn on and begin cycling through its multiple screens.

STEP 7: Using an AC Voltmeter, verify that the input voltage readings are within 
 

the limits specifi ed below.

 

NOTE:  For a 3-Wire system, the voltages are measured Phase to    

 

Phase.  On 4-Wire systems the voltages are measured Phase to 

 Neutral.

     

Meter Input Voltage 

 

Nominal Voltage   

Limits (+/-10%)

     120/208V, 3 Ph, 4 Wire  

120 VAC  

 

108 to 132 VAC

     277/480V, 3 Ph, 4 Wire  

277 VAC  

 

249 to 305 VAC

     240 V, 3 Ph, 3 Wire 

 

240 VAC  

 

216 to 264 VAC

     480 V, 3 Ph, 3 Wire 

 

480 VAC  

 

432 to 528 VAC 

STEP 8: Remove power from the unit by de-energizing the external switch.

Page 10

Summary of Contents for D-Mon



























Reviews:

No comments