E-max BingoConsole, Operator'S Manual

Page: 46 / 85

E-max Gaming Corporation, Inc.
46
System Power Issues:
Problem
Possible Cause What to do or check
Electronics and Ball
consoles have no power Hall power not available Check hall fuses or circuit
breakers
Outlet strip #2 power cord
not plugged into hall power
or outlet switch not on Plug cord into 120 VAC,
grounded power source
UPS power switch not ON Depress power ON switch
UPS circuit breaker tripped Depress UPS circuit breaker
button on the back of the
UPS
Power available, but
Electronics console
equipment not powered
correctly Dell AC cord unplugged
from UPS Plug in Dell power cord to
UPS1 socket as shown in
the Appendix
Dell computer turned off Depress power ON button
on Dell computer
Operator Monitor AC cord
unplugged from UPS Plug in Operator Monitor
AC cord to UPS2 socket as
shown in the Appendix
Operator Monitor turned off Depress Monitor ON switch
on the front panel of the
monitor
AC Outlet Strip 1 not
plugged into UPS Plug strip into UPS as
shown in the Appendix.
Note that strip 1 must go
into UPS3 socket.
AC Outlet Strip 1 or 2
circuit breaker tripped Reset outlet power switch to
ON position
Power available, but Ball
console equipment not
powered correctly AC power cord to Ball
console not plugged into
Electronics console Plug in power cord to
Outlet strip #2 socket as
shown in the Appendix
Blower motor unplugged or
blower motor circuit
breaker tripped Inside the blower motor
compartment, check that the
AC power cord is plugged
into the outlet. Reset the
breaker switch on the outlet
Blower motor switch OFF Place the switch on the ball
tray to the ON position
UPS did not work properly
when AC power failed UPS defective or battery
pack worn or defective Call for service to replace
the UPS
UPS is beeping Low AC line voltage Specification in Appendix