E-max BingoConsole Operator'S Manual Download | Manualshive

Page: 14 / 85

background image

E-max Gaming Corporation, Inc.

14

Figure 2.6

Observe that the following events occur after pressing and releasing the push-button:

•

The green

On Line

indicator flashes.

•

The yellow

On Battery

indicator lights while the Self-Test is being performed.

•

When Self-Test has successfully completed, only the green

On Line

indicator will be lit and the Back-

UPS is ready for use.

WARNING!

If the internal battery is not connected properly, the green

On Line

indicator and red

Replace Battery

indicator

will light and the UPS will also emit a chirping sound. (Call for service if this occurs).

2. Once power is applied to the UPS, the red LEDs on the Flashboard Reset switch and the Ball Reset switch
should be blinking. This indicates the Dell computer is off and the system is waiting for Dell communications.

3. Turn on the Dell computer by pressing the power on button on the front of the computer. The system will
power up and a display will be seen on the monitor (Chapter 4). White lights on the camera ball illuminator
should be on. When the Dell computer communicates with the data router and the ball tray, the two red LEDs on
the manual switches will turn off.

4. Turn on the blower motor switch on the ball console. If the blower fails to start, check the blower motor
troubleshooting section

(Chapter 9).

If the motor is operational, turn it off. Release the balls into the ball tray

chamber by using two hands and pulling back on both black knobs. Now release the balls into the mixing
chamber by pulling back on the red door release knob and holding until all balls have entered the mixing
chamber.

2.6 Flashboard, Video and Audio Installation

The E-max

TM

Bingo Console supports a wide variety of audio, video and flashboard systems. Each installation is

unique to your hall environment. Please refer to the E-max

TM

Bingo Console Installation Manual which describes

how video, audio and flashboard systems interface to the E-max™. Your E-max™ distributor or factory
representative should be consulted and assist with these installations.

«
...
12
13
14
15
16
...
»

Summary of Contents for BingoConsole






















































































Reviews:

No comments

Related manuals for BingoConsole

Brand: FAS Pages: 4

BLACKJACK 72002

Brand: Radica Games Pages: 1

Brand: Franklin Pages: 2

Brand: Excalibur Pages: 9

Brand: Tomy Pages: 4

Brand: JVC Pages: 62

Brand: JVC Pages: 24

Intellivision 10 Video Game System 10500

Brand: Techno Source Pages: 24

Super Sportstation

Brand: Cranium Pages: 2

Jungle Adventure

Brand: Cranium Pages: 2

Jam Pack Jam none

Brand: Cranium Pages: 2

Puzzles Plus Mix & Match Memory Game

Brand: Cranium Pages: 2

Brand: MD SPORTS Pages: 18

Puppy Surprise 10437

Brand: Playskool Pages: 1

Brand: Playskool Pages: 2

Barney Hide'n Seek Twinken the Dream Maker

Brand: Playskool Pages: 1

Barney Pop-Up Playmat 5755

Brand: Playskool Pages: 2

Alphabet Roadway

Brand: Playskool Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands