E-max BingoConsole, Operator'S Manual

Page: 44 / 85

E-max Gaming Corporation, Inc.
44
8.3 Replacing the Blower Air Filter
CAUTION! Insure that the ball console
power switch for the blower motor is in the
off position before servicing the filter.
The air filter is located in the Ball Console
behind the access panel (
Figure 8.0 ) Unscrew
the two turn button screws on each side of the
access panel to remove the access panel. Slide
each air filter locking retainer away from the
filter then pull filter up to remove. Air filter
should be replaced with the filter specified in
Appendix B. Air filter replacement interval
varies depending on hall air conditions and
number of hours played. Check filter once a
month. A dirty filter can cause motor
overheating and poor ball action.
8.4 Replacing the Arm Rest
Call for Service to replace Arm Rest.
8.5 Cleaning Ball Tray Chamber
Call your authorized E-max™ distributor for all ball chamber maintenance
FOR ALL OTHER SERVICE NEEDS CONTACT YOUR LOCAL DISTRIBUTOR OR E-max™
REPRESENTATIVE.
Figure 8.0