
9
|
P a g e
8.
Caution –
When installing pedals there are two separate pedals for the left and right sides
of the bike. They have different thread patterns and it is important to be sure each is
installed on the correct side of the bike to avoid stripping the threads. The following
procedure is performed so that when the bike is pedaled it tightens the pedals.
9.
Apply small amount of grease on pedal threads.
10.
Right Pedal
– Facing the bike from the chain side, place pedal with R on the end of its
bolt on chain side of bike and tighten by turning clockwise (top of wrench turning
towards the front of bike as noted in the picture below.) Tighten pedal very tight.