32|
P a g e
Tires
1.
Before each ride always inspect your tires for cracks or wear. If any issues are found
always address before riding.
2.
Check tire pressure with a quality tire gauge and be sure the pressure is between 20-30
psi.
3.
If tire will no longer hold air then the tube may need to be replaced.
Disconnecting Power to Rear Motor
Your E-Lux Electric Bike has a powerful electric motor that is located in the rear hub of the
bicycle. If removal of the rear tire is necessary you must first disconnect the power cable that
runs to the hub. This can be done by pulling both ends of the cable opposite directions at the
connector. Please see photo below for location. When putting the tire back on the connector has
an arrow on each plug that has to be aligned as you plug it in. If you do not have a bike stand,
put the bike on its side on soft carpet and remove the tire. Do not put the bike upside down as it
will damage the throttle and display on the handle bars.