69
Ｎｅｔ ＤＶＲ
Encode Para.: Record mode (All); Encoding stream type (VBR); Definition (FD1); Bitrate (2M); Image quality (High); Frame rate (25fps); Audio (Enabled);
There has 3 kinds of upgrade method: 1.Web netview upgrade 2. USB upgrade 3.FTP upgrade
Please read the upgrade instructions carefully before upgrade.
1. Web netview upgrade
Ø
Please double check the version of the upgrade software, so you can restore to the former version when your upgrade is failed. If your system are running well or just don’t need the
new function, we recommend you keep the default version. Please backup the important record files before upgrade.
Ø
Do ensure supplying the power and the stability of network when upgrading. Network outages and interrupted power supply will cause upgrading failure. If the host-side did not
appear “the update was successful, which is resuming the equipment, please be later...” in 5 minutes after the browser side shows uploading upgrade file completed, you can shut down
and then reboot, then check whether the host computer update was successful.
Ø
Please double check the version of the upgrade software, including machine model and boot interface, and make sure whether it corresponds to your system. If you have any doubts,
don’t upgrade, or in case you fail to upgrade the firmware, you can neither redo the system upgrade nor restart the machine (These upgrade failure machine must send back to the factory).
Ø
After upgrade, for the new features, please refer to the user manual of the new version. You can get the new version from our website or the suppliers.
Ø
Please don’t modify the software (including the name of the firmware), otherwise, we will take no responsibility and will not provide free update.
4.10.4 Upgrade Management
Schedule record: Schedule record (Disable).
Alarm Setting: Motion record (Disable); Alarm record (Disable); Sensor type (Normal On); Alarm output channel (1-4); PTZ preset point (Disable); Email linkage (Disable).
Network: Auto redial (Disable); Network bitrate (512K); Image quality (High); Network audio (Enable).
Schedule Restart: Schedule restart (Disable).
COM: COM device (PTZ); Baudrate (9600); Data bit (8); Parity bit (None); Stop bit (1).
PTZ: PTZ Protocol (Unknown); Address code (the same with channel number).
Audio type (digital audio); pre-record time (10s); Alarm Delay-record time (30s); Enable schedule snapshot (Disable); Enable motion snapshot (Disable);
Enable alarm snapshot (Disable); Snapshot period (1S); Snapshot number (1 pcs).
eLineTechnology.com
