E-line ELI-ECOM-4, User Manual

Page: 111 / 198

179

Delete: Click it to remove selected channel group.

Move up: Click it to move current selected channel up.

Move down: Click it to move current selected channel down.

Default: Click it to restore default setup.
Tips:

Use mouse or Shift button to switch and button to enable /disable tour. means the tour
funciton is enabled and meas tour funciton is disabled.

On the navigation bar, click or to enable/disable tour function.
Figure 4-123
4.10.5.2.3 Zero-channel Encoding
Click zero-channel encoding button, you can go to the following interface. See Figure 4-124.Here you
can enable and set zero-channel encoding function so that you can view several video sources at one
channel.

Enable: This function is disabled by default. Check the box here to enable this function so that you
can control the zero-channel encoding function at the WEB.

Compression: System default setup is H.264. You can set according to device capability.

Resolution: The resolution value may vary due to different device capabilities. Please select from
the dropdown list.

Frame rate: The frame rate value may vary due to different device capabilities. Please select from
the dropdown list.

Bit Rate: The bit rate value may vary due to different device capabilities and frame rate setups.
Please select from the dropdown list.

Save: Click the Save button to save current setup. If this function is disabled, you can not operate
zero-channel encoding function at the WEB, the video is black or null even you operate when the