E-line ELI-ECOM-16 User Manual Download Page 198

Page: 198 / 198

266

Appendix F Compatible Wireless Mouse List

Please refer to the following sheet for compatible SD card brand.

Brand

Model

V80

Rapoo

3500

Logitech

M215

Shuangfeiyan

Tianyao G7-630

Note:



This manual for reference only. Slight difference may be found in the user interface.



All the designs and software here are subject to change without prior written notice.



All trademarks and registered trademarks mentioned are the properties of their respective
owners.



If there is any uncertainty or controversy, please refer to the final explanation of us.



Please visit our website or contact your local retailer for more information.

Summary of Contents for ELI-ECOM-16







































































































































































































Search results

Summary of Contents for ELI-ECOM-16

Reviews:

Related manuals for ELI-ECOM-16

Brands by name

Popular brands

E-line ELI-ECOM-16, User Manual

Search results

Summary of Contents for ELI-ECOM-16

Reviews:

Related manuals for ELI-ECOM-16

Brands by name

Popular brands