When the Standard definition/high definition switch control cable is short
circuited, system outputs standard definition video. Otherwise, when the
circuit is open, system outputs the high definition video.
3
Dome Installation
Important
Before the installation, please make sure the installation surface can sustain at
least 3 times the weight of the bracket and the camera.
3.1
HD-CVI Glass Housing
The dome camera is usually installed on a ceiling. Although, It could also be in-
stalled on a wall. For the side exit cable installation, please make sure the side exit
cable direction is the same as shown in the installation position map.
•
Before you secure the screws on the pedestal, please pull the cable through
the cable exit of the pedestal.
•
Do not remove the electrostatic film until the installation is completed. After
you remove the film, do not touch the enclosure in case there is any scratch.
Ceiling or Wall
Installation Position Map
Expansion Bolts
Self-Tapping Screw
Enclosure fastening screw
Inner Hex Wrench
