Important Safeguards and warnings
1.Electrical Safety
All installation and operation should conform to your local electrical
safety codes.
The power shall conform to the requirement in the SELV (Safety Extra
Low Voltage) and the Limited power source is rated 12V DC (24V AC)
in the IEC60950-1.
We assume no liability or responsibility for any fires or electrical shock
caused by improper handling or installation.
2.Transportation Security
Heavy stress, violent vibration or water splash are not recommended
during transportation, storage, and installation.
3.Installation
Do not apply power to the camera before completing installation.
Please install the proper power cut-off device during the installation
connection.
Always follow the instruction guide the manufacturer recommended.
If this product is installed in the ceiling, please make sure this installa-
tion position can sustain the min 11 Lbs.
4.Qualified Engineers Needed
All the examination and repair work should be done by a qualified ser-
vice engineer.
We are not liable for any problems caused by unauthorized modifica-
tions or attempted repair.
5.Environment
This series camera should be installed in a cool, dry place away from di-
rect sunlight or strong light, inflammable, explosive substance and etc.
