E.L.M. Leblanc TRL 7.26 RF, User Manual

Page: 3 / 12

TRL 7.26 RF – 6720816708 (2015/05) 3
2.2 Product data relating to consumption
energy
1.2 General safety instructions
2.1 Declaration of Conformity
2 Product Information
ÿ Observe the safety and warning instructions.
• Keypad lock (child protection) • Battery
operation, duration >2 years • Low battery
indicator • Battery replacement without
memory loss except for
We recommend concluding an annual inspection
contract and having maintenance carried out as required
by an authorized specialist company. ÿ Have this work
carried out exclusively by a professional
ÿ Read the user manuals (heat generator, regulation,
IV
1) Classification according to EU Regulation No. 811/2013
on the labeling of combination products
Classe1) [%]1),2)
H Instructions for users This instruction
manual is intended for the user operating the heating
installation.
If the installation is not in operation, there is a risk of
freezing: ÿ Observe all instructions relating to frost
protection.
• Reset function
ÿ
approved.
ÿ Remedy any detected faults immediately.
TRL 7.26 RF
H Inspection and maintenance
additional features such as domestic hot water production
or anti-blocking protection. ÿ Have detected defects
rectified immediately.
The manufacture and operation of this product
comply with the European directives in force as
well as the additional conditions required by the
country concerned. Conformity has been proven by CE
marking.
time
Any other use is not intended. Any resulting damage is
excluded from the warranty.
The data given below meets the requirements of EU
regulations no. 811/2013 in addition to Directive 2010/30/
EU. The class of the thermostat is necessary for the
calculation of the energy efficiency for the combi product
and can be found in the system data sheet.
2.3 Characteristics •
Wireless communication by radio signal from the TRL
(transmitter) with the receiver connected to the
installation. Operating distance of approximately 30
meters in residential areas.
• «O/I» switch for standby mode
• 7-day programming • 9 pre-
established factory programs • 4
user programs • Graphic display of
the program • Ambient temperature
and Time displayed • Comfort / Reduced /
Frost protection temperatures • Temporary
temperature override • Automatic or Manual
operation • Holiday function
etc.) before use and keep them.
Product Information
2,0
H Frost damage
H Intended use
The declaration of conformity of the product is available
on request. By contacting the address on the back of this
notice.
PID room thermostat ÿ State
of delivery
ÿ The installation must always remain in operation for the functions
The instructions in all notices must be followed. Failure to
follow these instructions may result in property damage,
bodily injury or fatal accidents.
Function
2) % contribution to seasonal space heating energy
efficiency
Regular inspection and maintenance are prerequisites for
safe and environmentally friendly operation of the heating
system.
ÿ This product must be used exclusively to regulate heating
installations in single-family homes or apartment buildings.
Machine Translated by Google