35
Landing Gear Installation
Required Parts
Assembled airframe
Landing gear (2)
1
1
/
2
" wheel (2)
Wheel stopper (2)
Wheel pant (2)
Required Tools and Adhesives
Foam-safe CA
1. Place the wheels on the landing gear. Check
that they can roll freely. Enlarge the hole in the
wheel if necessary. Use a wheel stopper and
foam-safe CA to retain the wheel.
Note
: Be very careful not to get CA onto the
wheel, preventing it from rolling.
2. Slide the gear into position, but do not glue it
yet. The end of the gear will rest in the hole on
the fuselage spine support.
3. Repeat Steps 1 and 2 for the remaining landing
gear and wheel.
Summary of Contents for Tensor 4D
Page 1: ...Assembly Manual Tensor 4D...
